Tandberg PrecisionHD 1080p User Manual download pdf (Page 19)

D14245.04—DECEMBER 2008 19

PrecisionHD 1080p Camera

User Guide

Remote control

Video mode selection

Method

The DIP switch selection has priority over the selection made by

the CAM_Video_Format command. If the DIP switch is set to auto,

the CAM_Video_Format setting will be used. If both are set to auto,

resolution will be controlled automatically by EDID.

DIP Switch

Switches are numbered 1 to 5. The VISCA column shows the value

that should be used when using the CAM_Video_Format command.

The DIP switches are only read by the SW at startup/boot. So if the

DIP switches are changed the camera must be rebooted.

If an undeﬁned mode is selected, the output will default to auto.

1 2 3 4 5 Visca HDMI HD-SDI

0 0 0 0 0 x Auto*

0 0 0 0 1 0x0000 1080p25 1080p25

0 0 0 1 0 0x0001 1080p30 1080p30

0 0 0 1 1 0x0002 1080p50 720p50

0 0 1 0 0 0x0003 1080p60 720p60

0 0 1 0 1 0x0004 720p25 720p25

0 0 1 1 0 0x0005 720p30 720p30

0 0 1 1 1 0x0006 720p50 720p50

0 1 0 0 0 0x0007 720p60 720p60

0 1 0 0 1 0x0009 SW control

* Camera negotiates format over HDMI, HD-SDI tracks HDMI, and defaults to 1080p30 in

absence of HDMI sync.

The DIP switch

What’s in this user guide?

Getting started

Connecting the camera

Making your own cables

Contact information

1 2 ... 14 15 16 17 18 19 20

No comments

Tandberg PrecisionHD 1080p User Manual Page 19