Tandberg 8000 MXP User Manual download pdf (Page 175)

Administrator Settings

161

4.4.7 Default Call Settings

Default Call Settings are connected with Call Settings

in the call menu. If you leave Call Settings

unchanged when making a call, the system will use the Default Call Settings in the call.

In addition to the Call Settings Call Type, Net, Bandwidth and Restrict (56k), you also find settings

for H.320 Auto bandwidth and H.323 Auto bandwidth in Default Call Settings.

Call Type

Call Type can be set to:

 Video Call

 Telephone Call

If either the Call Type is set to Telephone Call or the Place Telephone Call

icon is selected when making a call, the call will be set up as a telephone call.

In all other cases the call will be set up as a video call.

Some network configurations may cause the setup of a video call to fail. The

call will then be set up as a telephone call instead if Fallback to Telephony is

enabled.

For MultiSite calls, Call Type enables you to specify both telephone calls and

video calls in the same conference.

Network

The Network alternatives are:

 Auto

 ISDN

 H.323

 SIP

If Auto is selected, the system will select the right network depending on the

entered number:

 If an IP-address (e.g. 10.12.34.56 ) is entered, H.323 is selected.

 If the first digits in the number match those set in H.323 Prefix, H.323

is selected.

 In other cases, ISDN (H.320) is selected.

ISDN indicates:

 ISDN-BRI

 ISDN-PRI

 Leased E1/T1

 External Networks

If a gatekeeper is present, it is possible to place IP-calls using “telephone-

style” numbers, e.g. an E.164 alias, according to the numbering plan

implemented in the gatekeeper. The gatekeeper will then translate the dialed

number into an IP-address, see H.323 Settings for more information about

gatekeepers.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 307 308

No comments

Tandberg 8000 MXP User Manual Page 175